Clear wall coatings
& brick sealing in Kent.
For face brickwork you don't want to cover up. A breathable sealer soaks into the masonry and repels water without changing the colour or the texture.
Some walls shouldn't be painted.
Plenty of property around Kent has brickwork worth looking at — period terraces, cottages, anything where the character is in the masonry itself. Covering that in a textured colour coating solves the water problem and destroys the building's face in the process.
A clear coating is absorbed into the surface of the brick rather than forming a film over it. Water then beads and runs off instead of soaking in, but the wall looks essentially unchanged: same colour, same texture, no sheen.
It is not a crack bridger. If your wall is moving or the render is failing, a clear sealer is the wrong product and we'll say so.
When a clear coating suits
- Face brickwork you want to keep visible
- A period or listed property where appearance matters
- Brick that has gone porous and darkens in rain
- Damp appearing on an exposed elevation after rain
- Sound masonry with no structural cracking
- Somewhere a colour coating would look wrong
Sound brickwork only. If there's cracking or failed pointing, that gets repaired before anything is applied.
Brickwork sealed without changing how it looks
The wall looks the same afterwards, which is the entire point. The difference shows the next time it rains and the brick stops darkening.
Prepare, repoint, then seal.
A sealer is only as good as the surface underneath. Perished pointing lets water straight past whatever is on the brick face.
So the pointing gets sorted first, or the sealer is pointless.
- 01
Assess the masonry
Brick condition, pointing, any cracking or spalling, and whether a clear product is genuinely the right call.
- 02
Repoint where needed
Perished mortar raked out and repointed to match, because that's usually where water actually gets in.
- 03
Clean down
Algae and dirt removed so the sealer soaks into clean masonry rather than sitting on grime.
- 04
Apply the sealer
Worked into the surface at the specified coverage rate, with adjacent surfaces masked.
- 05
Check it beads
We test a section with water before finishing so you can see it working.
Got brickwork you'd rather not paint?
Send us a photo of the elevation and we'll tell you whether a clear sealer is right for it, or whether the pointing is the real job.